An air receiver is a pressure-rated storage tank that sits between your compressor and your factory. It holds a reserve of compressed air so that sudden, heavy demand is met instantly from storage rather than forcing the compressor to surge. The result is steadier pressure at the tools and a compressor that runs less often.
Absorbs demand spikes so pressure at the work area stays consistent.
Fewer load/unload cycles means less wear and lower energy use.
Air cools in the tank, so some condensate separates and drains before the line.
A compressor that cycles less simply lasts longer between services.
A common rule of thumb is to provide roughly 3 to 5 litres of receiver volume for every CFM of compressor output, then adjust for how variable your demand is — plants with sharp, intermittent loads benefit from more storage. We size the tank to your compressor and duty cycle so it's neither undersized (causing cycling) nor wastefully large.
A receiver works best alongside an air dryer and proper filtration. We supply the complete system and the spares to keep it running.
It stores a reserve of compressed air to meet sudden demand, stabilise system pressure, reduce how often the compressor cycles, and allow some moisture to condense and drain before the air reaches your tools.
A common starting point is about 3 to 5 litres of tank volume per CFM of compressor output, adjusted for how variable your air demand is. We size it precisely to your compressor and usage pattern.
No. A receiver removes only some condensate as air cools inside it. For reliably dry air you still need a refrigerated air dryer. The two work together.
Typically right after the compressor, before the dryer and distribution network, though placement is tailored to each plant layout.
Tell us your air demand and working pressure — we'll recommend a model and send a quote, usually within one business day.
Request a quote →